WiFi setup.

Send your WiFi credentials to a Kiri Bridge over Bluetooth. Use desktop Chrome on a Windows PC or Mac. Phone browsers cannot complete this flow because they do not expose the required Web Bluetooth API. The device joins the network and the rest of setup happens on its local web UI. 2.4 GHz only.

Recommended first

Use the WiFi hotspot setup if you can.

The installer hotspot is simpler and works from phones, tablets, and computers. Use this BLE page only if you specifically want to provision WiFi over Bluetooth first.

Use WiFi hotspot → Continue with BLE
Bluetooth checking Device not selected WiFi not configured
01

Look for blue.

A fast blue blink means the Kiri Bridge is advertising over BLE and ready to be configured. Continue from desktop Chrome on a Windows PC or Mac; phone browsers cannot use this setup page. If you don't see the blue blink, power-cycle the device and wait a few seconds.

02

Pick the device.

Choose the BLE device named PROV_KIRI_…. Keep this tab open until WiFi setup finishes.

03

Send WiFi.

The password stays visible — easier to catch typos before you send. 2.4 GHz networks only.

04

Open the portal.

When WiFi connects, the device's local web UI is reachable on your network. That's where you upload the firmware and pair with HomeKit.

Log